D-Link DES-1210-28/ME - Disable Dhcp_Relay; Config Dhcp_Relay Add Ipif System

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
83
DES-1210-28/ME:5#
disable dhcp_relay
Purpose To disable DHCP Relay server on the Switch
Syntax
disable dhcp_relay
Description
The disable dhcp_relay command sets the DHCP Relay to be
globally disabled on the Switch and on all existing VLANs.
Parameters None.
Restrictions Only Administrator or operate-level users can issue this command.
Example usage:
To disable DHCP Relay on the Switch:
DES-1210-28/ME:5# disable dhcp_relay
Command: disable dhcp_relay
Success!
DES-1210-28/ME:5#
config dhcp_relay add ipif system
Purpose
To define a DHCP server as a DHCP Relay server
Syntax
config dhcp_relay add ipif system <ipaddr>
Description
The config dhcp_relay add ipif system command adds DHCP
servers as DHCP Relay servers.
Parameters
<ipaddr> − The IP address of the DHCP server. Up to 4 servers can
be defined.
Restrictions Only Administrator or operate-level users can issue this command.
Example usage:
To add a DHCP server as a DHCP Relay server:
DES-1210-28/ME:5# config dhcp_relay add ipif System 10.6.150.49
Command: config dhcp_relay add ipif System 10.6.150.49
Success!
DES-1210-28/ME:5#