D-Link DES-1210-28/ME - Configure LLDP Port Admin Status

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
268
delete authen server_group
Purpose To delete a user-defined authentication server host.
Syntax
delete authen server_group <string 15>
Description
The delete authen server_ group command deletes a user-defined
authentication server group previously created on the Switch.
Parameters
<string 15> –Specifies the authentication server group name to be
deleted.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To delete a user-defined rd1 authentication server group:
DES-1210-28/ME:5# delete authen server_group dlinkgroup
Command: delete authen server_group dlinkgroup
Success.
DES-1210-28/ME:5#
show authen server_host
Purpose To view a user-defined authentication server host.
Syntax
show authen server_group {<string 15>}
Description
The show authen server_ group command displays user-defined
authentication server groups previously created on the Switch.
The following parameters are displayed:
Group Name – The name of the server group.
IP Address – The IP address of the authentication server group.
Protocol – The protocol used by the server group. Possible results
include TACACS+ or RADIUS.
Parameters None.
Restrictions None.
Example usage:
To view authenticaion server hosts currently set on the Switch: