D-Link DES-1210-28/ME - Config Syslocation; Config Sysname; Enable Snmp

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
69
IMPBv2 State : Disable
Loopback detection State : Disable
DHCP server screen State : Disable
Gratutious ARP State : Disable
DES-1210-28/ME:5#
config syslocation
Purpose To enter a description of the location of the Switch.
Syntax
config syslocation <string 20>
Description
The config syslocation command enters a description of the
location of the Switch. A maximum of 20 characters can be used.
Parameters
<string 20> - A maximum of 20 characters is allowed.
Restrictions Only Administrator or operator-level users can issue this command
Example usage:
To configure the Switch location for ‘HQ5F’:
DES-1210-28/ME:5# config syslocation HQ5F
Command: config syslocation HQ5F
Success.
DES-1210-28/ME:5#
config sysname
Purpose To define the name for the Switch.
Syntax
config sysname <string 20>
Description
The config sysname command defines the name of the Switch.
Parameters
<string 20> - A maximum of 20 characters is allowed.
Restrictions Only Administrator or operator-level users can issue this command
Example usage:
To configure the Switch name as ‘28ME’:
DES-1210-28/ME:5# config sysname 28ME
Command: config sysname 28ME
Success.
DES-1210-28/ME:5#
enable snmp
Purpose To enable SNMP support.
Syntax
enable snmp