D-Link DES-1210-28/ME - Enable Syslog

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
86
Example usage:
To disable the DHCP relay option 82 on the Switch:
DES-1210-28/ME:5# config dhcp_relay option_82 state disable
Command: config dhcp_relay option_82 state disable
Success!
DES-1210-28/ME:5#
show dhcp_relay
Purpose To display the DHCP Relay settings on the Switch .
Syntax
show dhcp_relay {ipif}
Description
The show dhcp_relay command displays the DHCP Relay status
and list of servers defined as DHCP Relay servers on the Switch.
Parameters None.
Restrictions None.
Example usage:
To display DHCP Relay settings:
DES-1210-28/ME:5# show dhcp_relay
Command: show dhcp_relay
DHCP/BOOTP Relay Status : Disabled
DHCP/BOOTP Hops Count Limit : 4
DHCP/BOOTP Relay Time Threshold : 0
DHCP Relay Agent Information Option 82 State : Disabled
DHCP Relay Agent Information Option 82 Check : Disabled
DHCP Relay Agent Information Option 82 Policy : Replace
DHCP Relay Agent Information Option 82 ID : 00-B2-FD-DA-EE-EB
Interface Server 1 Server 2 Server 3 Server 4
--------- --------------- --------------- -------------- ---------------
DES-1210-28/ME:5#
enable dhcp_local_relay
Purpose To enable the DHCP local relay feature globally
Syntax
enable dhcp_local_relay
Description
The enable dhcp_local_relay command enables the DHCP local
relay feature on the Switch.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command
Example usage: