D-Link DES-1210-28/ME - Show Igmp_Snooping Host; Show Router_Port

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
203
Command: show igmp_snooping forwarding vlan default
VLAN Name : Trinity
Multicast group : 224.0.0.2
MAC address : 01-00-5E-00-00-02
Port Member : 3,4
Total Entries : 1
DES-1210-28/ME:5#
show igmp_snooping host
Purpose To display the IGMP snooping host table entries on the Switch.
Syntax
show igmp_snooping host
Description
The show igmp_snooping host command displays the current
IGMP snooping forwarding table entries currently configured on the
Switch.
Parameters None.
Restrictions None.
Example usage:
To view the IGMP snooping host table on the Switch:
DES-1210-28/ME:5# show igmp_snooping host
Command: show igmp_snooping host
VLAN ID Group Port No IGMP Host
------ ---------------------- --------- ------------
Total Entries : 0
DES-1210-28/ME:5#
show router_port
Purpose To display the currently configured router ports on the Switch.
Syntax
show router_port {vlan <vlan_name 20> | static | dynamic |
forbidden}
Description
The show router_port command displays the router ports currently
configured on the Switch.
Parameters
vlan <vlan_name 20> − The name of the VLAN on which the router
port resides. Up to 32 characters can be used.
static − Displays router ports that have been statically configured.
dynamic − Displays router ports that have been dynamically learned.
forbidden − Displays router ports that have been forbidden
configured.
Restrictions None.
Example usage:
To display the router ports.