DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
14
Success.
DES-1210-28/ME:5#
show session
Purpose To display information about currently logged-in users.
Syntax
show session
Description
The show session command displays a list of all the users that are
logged-in at the time the command is issued. The information
includes the session ID (0 for the first logged-in user, 1 for the next
logged-in user, etc.), the Protocol used to connect to the Switch, the
user’s IP address, the user’s access Level (1=user, 15=admin), and
the account name on the Switch.
Parameters None.
Restrictions None.
Example usage:
To display the way users logged in:
DES-1210-28/ME:5# show session
Command: show session
Total Entries: 1
ID Login Time Live Time From Level Name
-- -------------------- ------------ --------------- ----- ---------------
0 Jan 1 01:04:08 2011 00:11:05 Serial Port 14 dorothy
Total Entries: 1
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
show switch
Purpose To display information about the Switch.
Syntax
show switch
Description
The show switch command displays information about the Switch
settings, including Device Type, MAC Address, IP configuration,
Hardware/Software version, System information, and Switch
Network configuration.
Parameters None.
Restrictions None.
Example usage:
To display the Switch information:
To Next Page
Loading...
