D-Link DES-1210-28/ME - Create VLAN

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
148
value (the priority) to a specific queue (the class_id).
Parameters
<value 0-63> –The selected value of priority. The value may be
between 0 and 63.
<class_id 0-3> – The class_id (queue) mapped to the priority. The
value may be between 0 and 3
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To configure the DSCP mapping with value 10 and class 2:
DES-1210-28/ME:5# config dscp_mapping dscp_value 10 class 2
Command: config dscp_mapping dscp_value 10 class 2
Success
DES-1210-28/ME:5#
show dscp_mapping
Purpose To display the setting of DSCP mapping.
Syntax
show dscp_mapping {dscp_value <value 0-63>}
Description
The show dscp_mapping command displays the mapping of DSCP
value.
Parameters
dscp_value <value 0-63> - The selected value of priority will be
dispalyed. The value may be between 0 and 63.
Restrictions None.
Example usage:
To display the DSCP mapping with value 10:
DES-1210-28/ME:5# show dscp_mapping dscp_value 10
Command: show dscp_mapping dscp_value 10
DSCP Class
--------------------------
10 2
DES-1210-28/ME:5#