D-Link DES-1210-28/ME - Access Authentication Control Commands

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
240
37
3737
37
COMMAND HISTORY LIST COMMANDS
The Command History List commands in the Command Line Interface (CLI) are listed (along with the
appropriate parameters) in the following table.
Command Parameter
?
show
command_history
dir
Each command is listed in detail, as follows:
?
Purpose To display all commands in the Command Line Interface (CLI).
Syntax
?
Description
The ? command displays all of the commands available through the
Command Line Interface (CLI).
Parameters
{<command>} – Lists all the corresponding parameters for the
specified command, along with a brief description of the command’s
function and similar commands having the same words in the
command.
Restrictions None.
Example usage:
To display all of the commands in the CLI: