D-Link DES-1210-28/ME - Delete Stp Instance_Id; Config Stp Mst_Config_Id

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
115
delete stp instance_id
Purpose To delete instance ID on the Swiwtch.
Syntax
delete stp instance_id <value 1-15>
Description
The delete stp instance_id command removes the instance ID of
STP on the Switch.
Parameters
<value 1-15> - The value of the instance ID to be removed.
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To remove instance id 2:
DES-1210-28/ME:5# delete stp instance_id 2
Command: delete stp instance_id 2
Success.
DES-1210-28/ME:5#
config stp mst_config_id
Purpose To update the MSTP configuration identification.
Syntax
config stp mst_config_id [revision_level <int 0-65535> | name
<string 32>]
Description
The config stp mst_config_id command uniquely identifies the
MSTP configuration currently configured on the Switch. Information
entered here is attached to BDPU packets as an identifier for the
MSTP region to which it belongs. Switches having the same
revision_level, name and identical vlans mapped for STP
instance_ids are considered to be part of the same MSTP region.
Parameters
revision_level <int 0-65535>–
The MSTP configuration revision
number. The value may be between 0 and 65535. This value, along
with the name and identical vlans mapped for STP instance_ids
identifies the MSTP region configured on the Switch. The default
setting is 0.
name <string 32> - A string of up to 32 alphanumeric characters to
uniquely identify the MSTP region on the Switch. This name, along
with the revision_level value and identical vlans mapped for STP
instance_ids identifies the MSTP region configured on the Switch. If
no name is entered, the default name is the MAC address of the
device.
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To configure the MSTP region of the Switch with revision_level 10 and the name ‘Trinity’:
DES-1210-28/ME:5# config stp mst_config_id name Trinity revision_level 10
Command: config stp mst_config_id name Trinity revision_level 10
Success.
DES-1210-28/ME:5#