D-Link DES-1210-28/ME - Enable Snmp Duplicate_Ip_Detected Traps; Disable Snmp Duplicate_Ip_Detected Traps

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
78
Success!
DES-1210-28/ME:5#
enable snmp duplicate_IP_detected traps
Purpose To enable SNMP duplicate IP detected traps support on the Switch.
Syntax
enable snmp duplicate_IP_detected traps
Description
The enable snmp duplicate_IP_detected traps command enables
SNMP duplicate IP detected traps support on the Switch.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To enable the SNMP duplicate_IP_detected traps on the Switch:
DES-1210-28/ME:5# enable snmp duplicate_IP_detected traps
Command: enable snmp duplicate_IP_detected traps
Success!
DES-1210-28/ME:5#
disable snmp duplicate_IP_detected traps
Purpose To disable SNMP duplicate IP detected traps support on the Switch.
Syntax
disable snmp duplicate_IP_detected traps
Description
The disable snmp duplicate_IP_detected traps command
disables SNMP duplicate IP detected traps support on the Switch.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To disable the SNMP duplicate_IP_detected traps on the Switch:
DES-1210-28/ME:5# disable snmp duplicate_IP_detected traps
Command: disable snmp duplicate_IP_detected traps
Success!
DES-1210-28/ME:5#