D-Link DES-1210-28/ME - Disable Snmp DHCP_ Screening Traps; Enable Snmp Impb_Violation Traps; Disable Snmp Impb_Violation Traps

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
71
DES-1210-28/ME:5#
disable snmp DHCP_ screening traps
Purpose To disable SNMP DHCP screening traps.
Syntax
disable snmp DHCP_screening traps
Description
The disable snmp DHCP_screening traps command enables
SNMP DHCP screening traps support on the Switch.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command
Example usage:
To disable SNMP DHCP screening traps support on the Switch:
DES-1210-28/ME:5# disable snmp DHCP_screening traps
Command: disable snmp DHCP_screening traps
Success!
DES-1210-28/ME:5#
enable snmp IMPB_violation traps
Purpose To enable SNMP IMPB violation traps.
Syntax
enable snmp IMPB_violation traps
Description
The enable snmp IMPBv2 traps command enables SNMP IMPB
violation traps support on the Switch.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command
Example usage:
To enable SNMP IMPB violation traps support on the Switch:
DES-1210-28/ME:5# enable snmp IMPB_violation traps
Command: enable snmp IMPB_violation traps
Success!
DES-1210-28/ME:5#
disable snmp IMPB_violation traps
Purpose To disable SNMP IMPB violation traps.
Syntax
disable snmp IMPB_violation traps
Description
The disable snmp IMPB_violation traps command enables SNMP
IMPB violation traps support on the Switch.
Parameters None.