D-Link DGS-3000 - Page 100

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
96
Format
show access_profile {[profile_id <value 1-512> | profile_name <name 32>]}
Parameters
profile_id - (Optional) Specify the index of the access list profile.
<value 1-512> - Enter the profile ID used here. This value must be between 1 and 512.
profile_name - (Optional) Specify the name of the profile.
<name 32> - Enter the profile name used here. This name can be up to 32 characters long.
Restrictions
None.
Example
To display the current access list table:
DGS-3000-26TC:admin#show access_profile
Command: show access_profile
Access Profile Table
Total User Set Rule Entries : 4
Total Used HW Entries : 128
Total Available HW Entries : 896
==============================================================================
Profile ID: 1 Profile name: EtherACL Type: Ethernet
MASK on
VLAN : 0xFFF
802.1p
Ethernet Type
Available HW Entries : 193
------------------------------------------------------------------------------
Rule ID : 1 Ports: 1
Match on
VLAN ID : 1
802.1p : 0
Ethernet Type : 0xFFFE
Action:
Permit
==============================================================================
==============================================================================
Profile ID: 2 Profile name: IPv4ACL Type: IPv4