DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
809
DGS-3000-26TC:admin#config syslog host all severity debug facility local0
Command: config syslog host all severity debug facility local0
Success.
delete syslog host 83-9
Description
This command is used to delete the syslog host(s).
Format
delete syslog host [<index 1-4> | all]
Parameters
<index> - Enter the host index value here.
all - Specify that all the host indexes will be used.
Restrictions
Only Administrators and Operators can issue this command.
Example
To delete the specific syslog host:
DGS-3000-26TC:admin#delete syslog host 4
Command: delete syslog host 4
Success.
show syslog host 83-10
Description
This command is used to display the syslog host configurations.
Format
show syslog host {<index 1-4>}
Parameters
<index> - (Optional) Enter the host index value here.
To Next Page
Loading...
