D-Link DGS-3000 - Disable Snmp

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
766
Format
enable snmp
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To enable SNMP:
DGS-3000-26TC:admin#enable snmp
Command: enable snmp
Success.
DGS-3000-26TC:admin#
disable snmp 78-24
Description
This command is used to disable the SNMP function.
Format
disable snmp
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To disable SNMP:
DGS-3000-26TC:admin#disable snmp
Command: disable snmp
Success.
DGS-3000-26TC:admin#