DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
70
Restrictions
Only Administrators can issue this command.
Example
To configure the login method list for Telnet:
DGS-3000-26TC:admin#config authen application telnet login method_list_name
login_list_1
Command: config authen application telnet login method_list_name login_list_1
Success.
show authen application 5-17
Description
This command is used to display the login/enable method list for all applications.
Format
show authen application
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To display the login/enable method list for all applications:
DGS-3000-26TC:admin#show authen application
Command: show authen application
Application Login Method List Enable Method List
----------- ----------------- ------------------
Console default default
Telnet login_list_1 default
SSH default default
HTTP default default
To Next Page
Loading...
