D-Link DGS-3000

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
182
Format
delete cfm linktrace {[md [<string 22> | md_index <uint 1-4294967295>] {ma [<string 22> |
ma_index <uint 1-4294967295>] {mepid <int 1-8191>}} | mepname <string 32>]}
Parameters
md - (Optional) Specify the maintenance domain name.
<string 22> - Enter the maintenance domain name her. This name can be up to 22 characters
long.
md_index - Specify the maintenance domain index.
<uint 1-4294967295> - Enter the maintenance domain index value here. This value must
be between 1 and 4294967295.
ma - (Optional) Specify the maintenance association name.
<string 22> - Enter the maintenance association name her. This name can be up to 22
characters long.
ma_index - Specify the maintenance association index.
<uint 1-4294967295> - Enter the maintenance association index value here. This value
must be between 1 and 4294967295.
mepid - (Optional) Specify the MEP ID used.
<int 1-8191> - Enter the MEP ID used here. This value must be between 1 and 8191.
mepname - (Optional) Specify the MEP name used.
<string 32> - Enter the MEP name used here. This name can be up to 32 characters long.
Restrictions
None.
Example
To delete the CFM link trace reply:
DGS-3000-26TC:admin#delete cfm linktrace mepname mep1
Command: delete cfm linktrace mepname mep1
Success.
DGS-3000-26TC:admin#
show cfm mipccm 16-24
Description
This command is used to show the MIP CCM database entries. All entries in the MIP CCM
database will be shown. A MIP CCM entry is similar to a FDB which keeps the forwarding port
information of a MAC entry.
Format
show cfm mipccm
Parameters
None.