D-Link DGS-3000 User Manual

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
69
Parameters
default - Displays default user-defined method list for promoting user's privilege to Admin level.
method_list_name - Displays the specific user-defined method list for promoting user's privilege
to Admin level.
<string 15> - Enter the method list name here. This value can be up to 15 characters long.
all - Displays all method lists for promoting user's privilege to Admin level.
Restrictions
Only Administrators can issue this command.
Example
To display all method lists for promoting user's privilege to Admin level:
DGS-3000-26TC:admin#show authen_enable method_list_name enable_list_1
Command: show authen_enable method_list_name enable_list_1
Method List Name Priority Method Name Comment
---------------- -------- --------------- ------------------
enable_list_1 1 tacacs+ Built-in Group
2 tacacs Built-in Group
3 mix_1 User-defined Group
4 local_enable Keyword
DGS-3000-26TC:admin#
config authen application 5-16
Description
This command is used to configure login or enable method list for all or the specified application.
Format
config authen application [console | telnet | ssh | http | all] [login | enable] [default |
method_list_name <string 15>]
Parameters
console - Application: console.
telnet - Application: Telnet.
ssh - Application: SSH.
http - Application: web.
all - Application: console, Telnet, SSH, and web.
login - Selects the method list of authentication methods for user login.
enable - Selects the method list of authentication methods for promoting user's privilege to Admin
level.
default - Default method list.
method_list_name - The user-defined method list name.
<string 15> - Enter the method list name here. This value can be up to 15 characters long.

D-Link DGS-3000 Specifications

General

Brand	D-Link
Model	DGS-3000
Category	Switch
Language	English