D-Link DGS-3000 - Chapter 44 Layer 2 Protocol Tunneling (L2 PT) Command List

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
474
Chapter 44 Layer 2 Protocol Tunneling
(L2PT) Command List
enable l2protocol_tunnel
disable l2protocol_tunnel
config l2protocol_tunnel ports [<portlist> | all] type [uni tunneled_protocol [{stp | gvrp |
protocol_mac [01-00-0C-CC-CC-CC | 01-00-0C-CC-CC-CD]}(1) | all] {threshold <value 0-
65535>} | nni | none]
show l2protocol_tunnel {[uni | nni]}
enable l2protocol_tunnel 44-1
Description
This command is used to enable the Layer 2 protocol tunneling function.
Format
enable l2protocol_tunnel
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To enable the Layer 2 protocol tunneling function:
DGS-3000-26TC:admin#enable l2protocol_tunnel
Command: enable l2protocol_tunnel
Success.
DGS-3000-26TC:admin#
disable l2protocol_tunnel 44-2
Description
This command is used to disable the L2PT function globally on the Switch.
Format
disable l2protocol_tunnel