D-Link DGS-3000 - Show Dhcp Binding

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
267
DGS-3000-26TC:admin#show dhcp excluded_address
Command: show dhcp excluded_address
Index Begin Address End Address
----- ------------- --------------
1 192.168.0.1 192.168.0.100
2 10.10.10.10 10.10.10.11
Total Entries : 2
DGS-3000-26TC:admin#
show dhcp binding 21-34
Description
This command is used to display dynamic binding entries.
Format
show dhcp binding {<pool_name 12>}
Parameters
<pool_name 12> - (Optional) Enter a DHCP pool name.
Restrictions
None.
Example
To display dynamic binding entries for “engineering”:
DGS-3000-26TC:admin#show dhcp binding engineering
Command: show dhcp binding engineering
Pool Name IP Addresss Hardware Address Type Status Lifetime
------------ -------------- ------------------ -------- ------- ---------
engineering 192.168.0.1 00-80-C8-08-13-88 Ethernet Manual 86400
engineering 192.168.0.2 00-80-C8-08-13-99 Ethernet Automatic 86400
engineering 192.168.0.3 00-80-C8-08-13-A0 Ethernet Automatic 86400
engineering 192.168.0.4 00-80-C8-08-13-B0 Ethernet Automatic 86400
Total Entries: 4
DGS-3000-26TC:admin#