D-Link DGS-3000 - Disable Gvrp

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
36
Format
enable gvrp
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the generic VLAN Registration Protocol (GVRP):
DGS-3000-26TC:admin#enable gvrp
Command: enable gvrp
Success.
DGS-3000-26TC:admin#
disable gvrp 3-18
Description
This command is used to disable the Generic VLAN Registration Protocol (GVRP).
Format
disable gvrp
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable the Generic VLAN Registration Protocol (GVRP):
DGS-3000-26TC:admin#disable gvrp
Command: disable gvrp
Success.
DGS-3000-26TC:admin#