D-Link DGS-3000 - Show Snmp Community

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
752
Example
To delete a SNMP community “System”:
DGS-3000-26TC:admin#delete snmp community System
Command: delete snmp community System
Success.
DGS-3000-26TC:admin#
show snmp community 78-6
Description
This command is used to display the community string configurations.
Format
show snmp community {<community_string 32>}
Parameters
<community_string 32> - (Optional) Enter the Community string.
If no parameter is specified, all community string information will be displayed.
Restrictions
None.
Example
To display SNMP community:
DGS-3000-26TC:admin#show snmp community
Command: show snmp community
SNMP Community Table
Community Name View Name Access Right
------------------------------- ---------------------- ------------
private CommunityView read_write
public CommunityView read_only
Total Entries : 2
DGS-3000-26TC:admin#