DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
645
Example
To configure the warning temperature threshold:
DGS-3000-26TC:admin#config temperature threshold high 80
Command: config temperature threshold high 80
Success.
config temperature 62-4
Description
This command is used to configure the trap state for temperature warning event.
Format
config temperature [trap | log] state [enable | disable]
Parameters
trap – Specify to enable or disable the trap state of the temperature warning event.
log – Specify to enable or disable the log state of the temperature warning event.
state - Specify to enable or disable the trap or log state of the temperature warning event.
enable - Specify to enable the trap or log state of the temperature warning event. This is the
default option.
disable - Specify to disable the trap or log state of the temperature warning event.
Restrictions
Only Administrators and Operators can issue this command.
Example
To configure the warning temperature trap state:
DGS-3000-26TC:admin#config temperature trap state enable
Command: config temperature trap state enable
Success.
To Next Page
Loading...
