DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
351
DGS-3000-26TC:admin#create fdb default 00-00-00-00-01-02 port 5
Command: create fdb default 00-00-00-00-01-02 port 5
Success.
To filter a unicast MAC:
DGS-3000-26TC:admin#create fdb default 00-00-00-00-01-02 drop
Command: create fdb default 00-00-00-00-01-02 drop
Success.
create fdb vlanid 33-2
Description
This command is used to create a static entry in the unicast MAC address forwarding table
(database).
Format
create fdb vlanid <vidlist> <macaddr> [port <port> | drop]
Parameters
<vidlist> - Enter a VLAN ID associated with a MAC address.
<macaddr> - Enter the MAC address to be added to the static forwarding table.
port - The port number corresponding to the MAC destination address. The switch will always
forward traffic to the specified device through this port.
<port> - Enter the port number corresponding to the MAC destination address here.
drop - Specify the action drop to be taken.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create a unicast MAC forwarding entry:
DGS-3000-26TC:admin#create fdb vlanid 1 00-00-00-00-02-02 port 5
Command: create fdb vlanid 1 00-00-00-00-02-02 port 5
Success.
To Next Page
Loading...
