D-Link DGS-3000 - Show Mirror

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
544
DGS-3000-26TC:admin#disable mirror
Command: disable mirror
Success.
DGS-3000-26TC:admin#
Restrictions
None.
show mirror 51-4
Description
This command is used to display the current mirror function state and mirror session configuration
on the Switch.
Format
show mirror
Parameters
None.
Example
To display mirroring configuration:
DGS-3000-26TC:admin#show mirror
Command: show mirror
Current Settings
Mirror Status: Enabled
Target Port :
Mirrored Port
RX:
TX:
DGS-3000-26TC:admin#