D-Link DGS-3000 - Show Ssh Algorithm

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
725
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable SSH server public key algorithm:
DGS-3000-26TC:admin#config ssh algorithm DSA enable
Command: config ssh algorithm DSA enable
Success.
DGS-3000-26TC:admin#
show ssh algorithm 74-2
Description
This command is used to show the SSH service algorithm.
Format
show ssh algorithm
Parameters
None.
Restrictions
None.
Example
To show server algorithm: