D-Link DGS-3000 - Chapter 43 Jumbo Frame Command List

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
472
Chapter 43 Jumbo Frame Command
List
enable jumbo_frame
disable jumbo_frame
show jumbo_frame
enable jumbo_frame 43-1
Description
This command is used to configure the jumbo frame setting as enable.
Format
enable jumbo_frame
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To enable the Jumbo frame:
DGS-3000-26TC:admin#enable jumbo_frame
Command: enable jumbo_frame
The maximum size of jumbo frame is 12288 bytes.
Success.
DGS-3000-26TC:admin#
disable jumbo_frame 43-2
Description
This command is used to configure the jumbo frame setting as disable.
Format
disable jumbo_frame