D-Link DGS-3000 - Disable Pvid Auto Assign

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
33
Example
To enable the auto-assign PVID:
DGS-3000-26TC:admin#enable pvid auto_assign
Command: enable pvid auto_assign
Success.
DGS-3000-26TC:admin#
disable pvid auto assign 3-13
Description
This command is used to disable auto assignment of PVID.
Format
disable pvid auto_assign
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable the auto-assign PVID:
DGS-3000-26TC:admin#disable pvid auto_assign
Command: disable pvid auto_assign
Success.
DGS-3000-26TC:admin#
show pvid auto_assign 3-14
Description
This command is used to display the PVID auto-assignment state.
Format
show pvid auto_assign