D-Link DGS-3000 - Chapter 27 Domain Name System (DNS) Resolver Command List

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
320
Chapter 27 Domain Name System (DNS)
Resolver Command List
config name_server add [<ipaddr> | <ipv6addr>] {primary}
config name_server delete [<ipaddr> | <ipv6addr>] {primary}
config name_server timeout <second 1-60>
show name_server
create host_name <name 255> [<ipaddr> | <ipv6addr>]
delete host_name [<name 255> | all]
show host_name {static | dynamic}
enable dns_resolver
disable dns_resolver
config name_server add 27-1
Description
This command is used to add a DNS resolver name server to the Switch.
Format
config name_server add [<ipaddr> | <ipv6addr>] {primary}
Parameters
<ipaddr> - Enter the IPv4 address of the DNS Resolver name server.
<ipv6addr> - Enter the IPv6 address of the DNS Resolver name server.
primary - (Optional) Specify that the name server is a primary name server.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To add DNS Resolver primary name server 10.10.10.10:
DGS-3000-26TC:admin#config name_server add 10.10.10.10 primary
Command: config name_server add 10.10.10.10 primary
Success.
DGS-3000-26TC:admin#