DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
321
config name_server delete 27-2
Description
This command is used to delete a DNS resolver name server from the Switch.
Format
config name_server delete [<ipaddr> | <ipv6addr>] {primary}
Parameters
<ipaddr> - Enter the IPv4 address of the DNS Resolver name server.
<ipv6addr> - Enter the IPv6 address of the DNS Resolver name server.
primary - (Optional) Specify that the name server is a primary name server.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete DNS Resolver name server 10.10.10.1:
DGS-3000-26TC:admin#config name_server delete 10.10.10.1
Command: config name_server delete 10.10.10.1
Success.
config name_server timeout 27-3
Description
This command is used to configure the timeout value of a DNS Resolver name server.
Format
config name_server timeout <sec 1-60>
Parameters
<sec 1-60> - Enter the maximum time waiting for a response from a specified name server.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure DNS Resolver name server time out to 10 seconds:
To Next Page
Loading...
