D-Link DGS-3000 - Page 326

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
322
DGS-3000-26TC:admin#config name_server timeout 10
Command: config name_server timeout 10
Success.
DGS-3000-26TC:admin#
show name_server 27-4
Description
This command is used to display the current DNS Resolver name servers and name server time
out on the Switch.
Format
show name_server
Parameters
None.
Restrictions
None.
Example
To display the current DNS Resolver name servers and name server time out:
Static Name Server Table:
Server IP Address Priority
------------------------------------------- -----------
10.10.10.10 Primary
10.1.1.1 Secondary
Dynamic Name Server Table:
Server IP Address Priority
------------------------------------------- -----------
10.48.74.122 Primary
DGS-3000-26TC:admin#
create host_name 27-5
Description
This command is used to create the static host name entry of the Switch.