D-Link DGS-3000 - Show Boot File

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
158
DGS-3000-26TC:admin#save log
Command: save log
Saving all system logs to NV-RAM.......... Done.
DGS-3000-26TC:admin#
To save all the configurations and logs to NV-RAM:
DGS-3000-26TC:admin#save all
Command: save all
Saving all configurations and logs to NV-RAM.......... Done.
DGS-3000-26TC:admin#
show boot file 15-4
Description
This command is used to display the configuration file and firmware image assigned as boot-up
files.
Format
show boot_file
Parameters
None.
Restrictions
None.
Example
To display the boot file:
DGS-3000-26TC:admin#show boot_file
Command: show boot_file
Boot-up Firmware : /c:/runtime.had
Boot-up Configuration : /c:/config.cfg
DGS-3000-26TC:admin#