D-Link DGS-3000 - Show Utilization Flash

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
632
Parameters
None.
Restrictions
None.
Example
To display DRAM utilization:
DGS-3000-26TC:admin#show utilization dram
Command: show utilization dram
DRAM Utilization :
Total DRAM : 131072 KB
Used DRAM : 118556 KB
Utilization : 90 %
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
show utilization flash 59-6
Description
This command is used to show the flash memory utilization.
Format
show utilization flash
Parameters
None.
Restrictions
None.
Example
To display FLASH utilization: