DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
847
DGS-3000-26TC:admin# create iproute 10.48.74.121/255.0.0.0 10.1.1.254 primary
Command: create iproute 10.48.74.121/8 10.1.1.254 primary
DGS-3000-26TC:admin# create iproute 11.53.73.131/8 10.1.2.11
Command: Command: create iproute 11.53.73.131/8 10.1.2.11
Success.
delete iproute 92-2
Description
This command is used to delete an IP route entry from the Switch’s IP routing table.
Format
delete iproute [default | <network_address>] <ipaddr>
Parameters
default - Deletes an IP default route (0.0.0.0/0).
<network_address> - Enter the destination IP address and net mask route. The address and the
mask can be set by the traditional format (for example, 10.1.2.3/255.0.0.0 or in CIDR format,
<ipaddr> - Enter the next hop IP address route that needs to be deleted
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete an IP default route:
DGS-3000-26TC:admin# delete iproute 10.48.74.121/255.0.0.0 10.1.1.254
Command: delete iproute 10.48.74.121/8 10.1.1.254
Success.
show iproute 92-3
Description
This command is used to display the switch’s IP routing table.
To Next Page
Loading...
