D-Link DGS-3000 - Chapter 59 Network Monitoring Command List

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
628
Chapter 59 Network Monitoring
Command List
clear counters {ports <portlist>}
show error ports <portlist>
show packet ports <portlist>
show utilization [cpu | ports]
show utilization dram
show utilization flash
clear counters 59-1
Description
This command is used to clear the Switch’s statistics counters.
Format
clear counters {ports <portlist>}
Parameters
ports - (Optional) Specify a range of ports to be configured.
<portlist> - Enter a list of ports used for the configuration here.
If no parameter is specified, system will display counters of all the ports .
Restrictions
Only Administrators and Operators can issue this command.
Example
To clear the Switch’s statistics counters:
DGS-3000-26TC:admin#clear counters ports 7-9
Command: clear counters ports 7-9
Success.
DGS-3000-26TC:admin#
show error ports 59-2
Description
This command is used to display the error statistics for a range of ports.