D-Link DGS-3000 - Chapter 55 Multicast VLAN Command List

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
587
Chapter 55 Multicast VLAN Command
List
enable igmp_snooping multicast_vlan
enable mld_snooping multicast_vlan
disable igmp_snooping multicast_vlan
disable mld_snooping multicast_vlan
create igmp_snooping multicast_vlan <vlan_name 32> <vlanid 2-4094> {remap_priority [<value
0-7> | none] {replace_priority}}
create igmp_snooping multicast_vlan_group_profile <profile_name 1-32>
create mld_snooping multicast_vlan <vlan_name 32> <vlanid 2-4094> {remap_priority [<value
0-7> | none] {replace_priority}}
create mld_snooping multicast_vlan_group_profile <profile_name 1-32>
config igmp_snooping multicast_vlan <vlan_name 32> {[add | delete] [member_port <portlist> |
[source_port <portlist> | untag_source_port <portlist>] | tag_member_port <portlist>] | state
[enable | disable] | replace_source_ip <ipaddr> | remap_priority [<value 0-7> | none]
{replace_priority}}(1)
config igmp_snooping multicast_vlan_group_profile <profile_name 1-32> [add | delete]
<mcast_address_list>
config igmp_snooping multicast_vlan_group <vlan_name 32> [add | delete] profile_name
<profile_name 1-32>
config igmp_snooping multicast_vlan forward_unmatched [disable | enable]
config mld_snooping multicast_vlan <vlan_name 32> {[add | delete] [member_port <portlist> |
[source_port <portlist> | untag_source_port <portlist>] | tag_member_port <portlist>] | state
[enable | disable] | replace_source_ipv6 <ipv6addr> | remap_priority [<value 0-7> | none]
{replace_priority}}
config mld_snooping multicast_vlan_group_profile <profile_name 1-32> [add | delete]
<mcastv6_address_list>
config mld_snooping multicast_vlan_group <vlan_name 32> [add | delete] profile_name
<profile_name 1-32>
config mld_snooping multicast_vlan forward_unmatched [disable | enable]
delete igmp_snooping multicast_vlan_group_profile [profile_name <profile_name 1-32> | all]
delete igmp_snooping multicast_vlan <vlan_name 32>
delete mld_snooping multicast_vlan_group_profile [profile_name <profile_name 1-32> | all]
delete mld_snooping multicast_vlan <vlan_name 32>
show igmp_snooping multicast_vlan_group_profile {< profile_name 1-32>}
show igmp_snooping multicast_vlan_group {<vlan_name 32>}
show igmp_snooping multicast_vlan {<vlan_name 32>}
show mld_snooping multicast_vlan_group_profile {<profile_name 1-32>}
show mld_snooping multicast_vlan_group {<vlan_name 32>}
show mld_snooping multicast_vlan {<vlan_name 32>}
enable igmp_snooping multicast_vlan 55-1
Description
This command is used to control the status of the multicast VLAN function.