D-Link DGS-3000 - Page 592

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
588
Format
enable igmp_snooping multicast_vlan
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To enable the IGMP snooping multicast VLAN function globally:
DGS-3000-26TC:admin#enable igmp_snooping multicast_vlan
Command: enable igmp_snooping multicast_vlan
Success.
DGS-3000-26TC:admin#
enable mld_snooping multicast_vlan 55-2
Description
This command is used to enable the MLD snooping multicast VLAN function. By default, the
multicast VLAN is disabled.
Format
enable mld_snooping multicast_vlan
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To enable MLD snooping multicast VLAN: