D-Link DGS-3000 - Show Wac

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
874
DGS-3000-26TC:admin# config wac user abc vlanid 100
Command: config wac user abc vlanid 100
Enter a old password:**
Enter a case-sensitive new password:**
Enter the new password again for confirmation:**
Success.
DGS-3000-26TC:admin#
show wac 95-13
Description
This command is used to display the WAC global setting.
Format
show wac
Parameters
None.
Restrictions
None.
Example
To show WAC:
DGS-3000-26TC:admin# show wac
Command: show wac
Web-based Access Control
-----------------------------------
State : Enabled
Method : RADIUS
Redirect Path : http://www.dlink.com
Virtual IP : 0.0.0.0
Virtual IPv6 : 2000::20
Switch HTTP Port : 80 (HTTP)
RADIUS Authorization : Enabled
Local Authorization : Enabled
Trap State : Enabled
DGS-3000-26TC:admin#