D-Link DGS-3000 - Show Authorization; Show Authentication

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
150
show authorization 14-9
Description
This command is used to display authorization status.
Format
show authorization
Parameters
None.
Restrictions
None.
Example
This example displays authorization status:
DGS-3000-26TC:admin#show authorization
Command: show authorization
Authorization for Attributes: Enabled.
DGS-3000-26TC:admin#
show authentication 14-10
Description
This command is used to display the authentication server failover configuration.
Format
show authentication
Parameters
None.
Restrictions
None.
Example
To show authentication global configuration: