D-Link DGS-3000 - Show Ports

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
21
the advertised speed. This setting has no effect when the port is working in the forced mode.
enable - Specify to enable the option to automatically downgrade the advertised speed.
disable - Specify to disable the option to automatically downgrade the advertised speed.
Restrictions
Only Administrators and Operators can issue this command.
Example
To configure the ports:
DGS-3000-26TC:admin# config ports 1-3 speed 10_full learning enable state
enable flow_control enable
Command: config ports 1-3 speed 10_full learning enable state enable
flow_control enable
Success.
DGS-3000-26TC:admin#
show ports 2-18
Description
This command is used to display the current configurations of a range of ports. No parameter will
show all ports.
Format
show ports {<portlist>} {[description | err_disabled | auto_negotiation | details | media_type]}
Parameters
<portlist> - (Optional) Enter a range of ports to be displayed.
description - (Optional) Specify to display the port description.
err_disabled - (Optional)Specify to display disabled information.
auto_negotiation - (Optional) Specify to display detailed auto-negotiation information.
details - (Optional) Specify if port information is included in the display.
media_type - (Optional) Displays SFP information.
Restrictions
None.
Example
To display the port details: