D-Link DGS-3000

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
124
Restrictions
Only Administrators and Operators can issue this command.
Example
To enable HTTP and configure port number:
DGS-3000-26TC:admin#enable web 80
Command: enable web 80
Note: SSL will be disabled if web is enabled.
Success.
DGS-3000-26TC:admin#
disable web 10-9
Description
This command is used to disable HTTP.
Format
disable web
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To disable HTTP:
DGS-3000-26TC:admin#disable web
Command: disable web
Success.
DGS-3000-26TC:admin#
reboot 10-10
Description
This command is used to restart the Switch.