DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
181
<uint 1-4294967295> - Enter the maintenance association index value here. This value
must between 1 and 4294967295.
trans_id - (Optional) Specify the identifier of the transaction displayed.
<uint> - Enter the transaction ID used here.
Restrictions
None.
Example
To show the link trace reply when the "all MPs reply LTRs" function is enabled:
DGS-3000-26TC:admin#show cfm linktrace mepid 5 md md6 ma ma1 trans_id 30
Command: show cfm linktrace mepid 5 md md6 ma ma1 trans_id 30
Transaction ID: 30
From MEP mep5 to 30-00-26-81-34-A2
Start Time : 2014-01-31 14:47:36
Hop MEPID MAC Address Forwarded Relay Action
--- ----- ----------------- --------- ------------
1 - 30-00-26-81-34-19 Yes FDB
2 - 30-00-26-81-34-B8 No Hit
To show the link trace reply when the "all MPs reply LTRs" function is disabled:
DGS-3000-26TC:admin#show cfm linktrace mepname mep1 trans_id 27
Command: show cfm linktrace mepname mep1 trans_id 27
Transaction ID: 27
From MEP mep1 to 32-00-70-89-31-06
Start Time : 2011-11-22 16:28:56
Hop MEPID Ingress MAC Address Egress MAC Address Forwarded Relay Action
--- ----- ------------------- ------------------- --------- ------------
1 - 00-00-00-00-00-00 32-00-70-89-41-06 Yes FDB
2 - 00-32-28-40-09-07 00-32-28-40-09-05 Yes FDB
3 2 00-00-00-00-00-00 32-00-70-89-31-06 No Hit
delete cfm linktrace 16-23
Description
This command is used to delete the stored link trace response data that have been initiated by the
specified MEP.
To Next Page
Loading...
