DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
130
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable an IP interface:
DGS-3000-26TC:admin#enable ipif newone
Command: enable ipif newone
Success.
disable ipif 10-17
Description
This command is used to disable an IP interface.
Format
disable ipif [<ipif_name 12> | all]
Parameters
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12 characters
all - Specify that all the IP interfaces will be disabled.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable an IP interface:
DGS-3000-26TC:admin#disable ipif newone
Command: disable ipif newone
Success.
show ipif 10-18
Description
This command is used to display an IP interface.
To Next Page
Loading...
