D-Link DGS-3000

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
29
Format
show vlan {<vlan_name 32>}
Parameters
<vlan_name 32> - (Optional) Enter the VLAN name to be displayed. The VLAN name can be up
to 32 characters long.
Restrictions
None.
Example
To display VLAN settings:
DGS-3000-26TC:admin#show vlan
Command: show vlan
VLAN Trunk State : Disabled
VLAN Trunk Member Ports :
VID : 1 VLAN Name : default
VLAN Type : Static Advertisement : Enabled
Member Ports : 1-26
Static Ports : 1-26
Current Tagged Ports :
Current Untagged Ports: 1-26
Static Tagged Ports :
Static Untagged Ports : 1-26
Forbidden Ports :
Total Static VLAN Entries: 1
Total GVRP VLAN Entries: 0
DGS-3000-26TC:admin#
show vlan ports 3-9
Description
This command is used to display the vlan information per ports.
Format
show vlan ports {<portlist>}