D-Link DGS-3000 - Disable Cfm

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
171
Format
enable cfm
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the CFM globally:
DGS-3000-26TC:admin#enable cfm
Command: enable cfm
Success.
DGS-3000-26TC:admin#
disable cfm 16-13
Description
This command is used to disable the CFM globally.
Format
disable cfm
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable the CFM globally:
DGS-3000-26TC:admin#disable cfm
Command: disable cfm
Success.
DGS-3000-26TC:admin#