DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
702
retransmit - The count for re-transmitting. The default value is 2.
<int 1-20> - Enter the re-transmit value here. This value must be between 1 and 20.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To add a new RADIUS server:
DGS-3000-26TC:admin#config radius add 1 10.48.74.121 key dlink default
Command: config radius add 1 10.48.74.121 key dlink default
Success.
config radius delete 70-2
Description
This command is used to delete a RADIUS server.
Format
config radius delete <server_index 1-3>
Parameters
<server_index 1-3> - Enter to delete a RADIUS server.Enter the RADIUS server index.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete a RADIUS server:
DGS-3000-26TC:admin#config radius delete 1
Command: config radius delete 1
Success.
To Next Page
Loading...
