DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
688
DGS-3000-26TC:admin#config scheduling_mechanism ports 1 strict
Command: config scheduling_mechanism ports 1 strict
Success.
show scheduling 69-7
Description
This command is used to display the current traffic scheduling parameters.
Format
show schedulin
g {<portlist>}
Parameters
<portlist> - (Optional) Enter a range of ports to be displayed.
If no parameter specified, system will display all ports scheduling configurations.
Restrictions
None.
Example
To display the traffic scheduling parameters for each CoS queue on port 1(take eight hardware
priority queues for example):
DGS-3000-26TC:admin#show scheduling 1
Command: show scheduling 1
QOS Output Scheduling On Port: 1
Class ID Weight
-------- ------
Class-0 1
Class-1 2
Class-2 3
Class-3 4
Class-4 5
Class-5 6
Class-6 7
Class-7 8
To Next Page
Loading...
Need help?
General