D-Link DGS-3000 - Show Authentication Ports

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
152
Parameters
None.
Restrictions
None.
Example
To display the authentication MAC format setting:
DGS-3000-26TC:admin#show authentication mac_format
Command: show authentication mac_format
Case : Uppercase
Delimiter : None
Delimiter Number : 5
DGS-3000-26TC:admin#
show authentication ports 14-13
Description
This command is used to display the authentication method and authorization mode on ports.
Format
show authentication ports {<portlist>}
Parameters
<portlist> - (Optional) Enter to display compound authentication on specific port(s).
Restrictions
None.
Example
To display the authentication settings for ports 1 to 3: