D-Link DGS-3000 - Show Lldp Ports

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
495
DGS-3000-26TC:admin#show lldp mgt_addr ipv4 10.90.90.90
Command: show lldp mgt_addr ipv4 10.90.90.90
Address 1 :
------------------------------------------------
Subtype : IPv4
Address : 10.90.90.90
IF Type : IfIndex
OID : 1.3.6.1.4.1.171.10.133.2.1
Advertising Ports : 1-2,5
DGS-3000-26TC:admin#
show lldp ports 46-9
Description
This command is used to display the LLDP per port configuration for advertisement options.
Format
show lldp ports {<portlist>}
Parameters
<portlist> - (Optional) Enter a range of ports to be displayed.
If the port list is not specified, information for all the ports will be displayed.
Restrictions
None.
Example
To display the LLDP port 1 TLV option configuration: