DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
25
DGS-3000-26TC:admin#create vlan vlanid 10-30
Command: create vlan vlanid 10-30
Success.
delete vlan 3-3
Description
This command is used to delete a previously configured VLAN by the name on the Switch.
Format
delete vlan <vlan_name 32>
Parameters
vlan - The VLAN name of the VLAN to be deleted.
<vlan_name 32> - Enter the VLAN name here. This name can be up to 32 characters long.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To remove a vlan v1:
DGS-3000-26TC:admin#delete vlan v1
Command: delete vlan v1
Success.
delete vlan vlanid 3-4
Description
This command is used to delete one or a number of previously configured VLAN by VID list.
Format
delete vlan vlanid <vidlist>
Parameters
vlanid - The VLAN ID list to be deleted.
To Next Page
Loading...
