DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
717
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To disable all previously entered RSPAN configurations:
DGS-3000-26TC:admin#disable rspan
Command: disable rspan
Success.
create rspan vlan 72-3
Description
This command is used to create an RSPAN VLAN. Up to 16 RSPAN VLANs can be created.
Format
create rspan vlan [vlan_name <vlan_name> | vlan_id <vlanid 1-4094>]
Parameters
vlan_name - Create the RSPAN VLAN by VLAN name.
<vlan_name> - Enter the VLAN name.
vlan_id - Create the RSPAN VLAN by VLAN ID.
<vlanid 1-4094> - Enter the VLAN ID between 1 and 4094.
Restrictions
Only Administrators and Operators can issue this command.
Example
To create an RSPAN VLAN entry by VLAN name “v2”:
DGS-3000-26TC:admin#create rspan vlan vlan_name v2
Command: create rspan vlan vlan_name v2
Success.
To create an RSPAN VLAN entry by VLAN ID “3”:
To Next Page
Loading...
